FOR KIA STINGER 3.3 GDI 17- FRONT PERFORMANCE CROSS DRILLED BRAKE DISCS 350MM
BRAKE DISC SETUP:
BRAKE DISC TYPE: INTERNALLY VENTED | HIGH CARBON | CROSS DRILLED
BRAKE DISC DIAMETER: 350MM
BRAKE DISC THICKNESS: 30MM
BRAKE DISC MINIMUM THICKNESS: 28MM
CENTERING DIAMETER: 69MM
114 PCD
DRILLED ONLY:
BRAKE GAS BUILD UP IS A MAJOR PROBLEM WHEN BRAKING AT HIGH SPEEDS WHICH EFFECTIVELY CAUSES BRAKE FADE. THE DRILLED DISC SURFACE ON THE KINETIX BRAKE DISCS
DISSIPATE HEAT MORE EFFECTIVELY BY BREAKING DOWN SURFACE GASES MORE EFFICIENTLY. THE HOLES ARE LASER DRILLED THROUGH THE DISCS WHICH REDUCE BRAKE MASS. THE
DRILLED BRAKE DISCS ALSO BENEFIT FROM KEEPING BRAKING TEMPERATURES RAPIDLY LOW WHICH HELPS KEEP THE PAD SURFACE FROM REACHING HIGH TEMPERATURES THAT CAN BE
CAUSED FROM HOT SURFACE GASSES.
FITS:
KIA STINGER GT 3.3 GDI 2017-
!!!STOP!!!
!! BEFORE YOU CLICK BUY IT NOW !!
COMPATIBILITY IS NOT 100% ACCURATE
BEFORE PURCHASING YOU MUST CONTACT US
BY CONFRIMING YOUR VEHICLE DATA
THIS CAN BE DONE BY USING THE TWO OPTIONS BELOW
OPTION 1-
ONLY FOR UK REGISTERED VEHICLES ONLY WE NEED THE UK REG , LICENCE PLATE OR CHASSIS / VIN
OPTION 2-
FOR NONE UK REGISTERED VEHICLES ONLY YOU MUST PROVIDE THE CHASSIS / VIN
THIS IS A MUST AND IS NEEDED SO THAT WE CAN CHECK FITMENT
WITHOUT THIS INFORMATION WE WILL NOT SHIP ANYTHING
THIS WILL ALSO AVOID ANY DISAPPOINTMENT OF RECEIVING INCORRECT PARTS
DO NOT BUY THIS ITEM UNTIL WE HAVE CONFIRMED
IT MAY LOOK OR SEEM CORRECT BUT THERE ARE MULTIPLE VARIATIONS
IF YOU LIVE IN ANY OF THE FOLLWOING POSTCODES PLEASE CAN YOU CONTACT US BEFORE YOU PURCHASE
AB , FK , HS , IV , KA , KW , PA , PH , ZE , BT , IM , TR
BRAKE DISC SETUP:
BRAKE DISC TYPE: INTERNALLY VENTED | HIGH CARBON | CROSS DRILLED
BRAKE DISC DIAMETER: 350MM
BRAKE DISC THICKNESS: 30MM
BRAKE DISC MINIMUM THICKNESS: 28MM
CENTERING DIAMETER: 69MM
114 PCD
DRILLED ONLY:
BRAKE GAS BUILD UP IS A MAJOR PROBLEM WHEN BRAKING AT HIGH SPEEDS WHICH EFFECTIVELY CAUSES BRAKE FADE. THE DRILLED DISC SURFACE ON THE KINETIX BRAKE DISCS
DISSIPATE HEAT MORE EFFECTIVELY BY BREAKING DOWN SURFACE GASES MORE EFFICIENTLY. THE HOLES ARE LASER DRILLED THROUGH THE DISCS WHICH REDUCE BRAKE MASS. THE
DRILLED BRAKE DISCS ALSO BENEFIT FROM KEEPING BRAKING TEMPERATURES RAPIDLY LOW WHICH HELPS KEEP THE PAD SURFACE FROM REACHING HIGH TEMPERATURES THAT CAN BE
CAUSED FROM HOT SURFACE GASSES.
FITS:
KIA STINGER GT 3.3 GDI 2017-
!!!STOP!!!
!! BEFORE YOU CLICK BUY IT NOW !!
COMPATIBILITY IS NOT 100% ACCURATE
BEFORE PURCHASING YOU MUST CONTACT US
BY CONFRIMING YOUR VEHICLE DATA
THIS CAN BE DONE BY USING THE TWO OPTIONS BELOW
OPTION 1-
ONLY FOR UK REGISTERED VEHICLES ONLY WE NEED THE UK REG , LICENCE PLATE OR CHASSIS / VIN
OPTION 2-
FOR NONE UK REGISTERED VEHICLES ONLY YOU MUST PROVIDE THE CHASSIS / VIN
THIS IS A MUST AND IS NEEDED SO THAT WE CAN CHECK FITMENT
WITHOUT THIS INFORMATION WE WILL NOT SHIP ANYTHING
THIS WILL ALSO AVOID ANY DISAPPOINTMENT OF RECEIVING INCORRECT PARTS
DO NOT BUY THIS ITEM UNTIL WE HAVE CONFIRMED
IT MAY LOOK OR SEEM CORRECT BUT THERE ARE MULTIPLE VARIATIONS
IF YOU LIVE IN ANY OF THE FOLLWOING POSTCODES PLEASE CAN YOU CONTACT US BEFORE YOU PURCHASE
AB , FK , HS , IV , KA , KW , PA , PH , ZE , BT , IM , TR