FREE UK MAINLAND DELIVERY

Shop Now

FOR RANGE ROVER SPORT 3.0 SDV6 HSE FRONT REAR BREMBO BRAKE DISCS PADS & SENSORS

The high damping coefficient ensures driving comfort and reduces vibration and noise.

Perfect result of Brembo's philosophy of offering also to the Aftermarket a range of products developed with the same parameters as the Original Equipment, the High Carbon (HC) brake discs offer comfort and reduced noise thanks to the high damping coefficient. 

The result comes from Brembo technology and complete control over production in its plants, which allows for variation of the chemical composition of the cast iron by increasing the percentage of carbon.

In compliance with European safety regulations, certified in observance of all the strictest international standards.

Brembo checks all phases of the production process: design, development, testing, casting, processing, assembly, distribution and assistance. The production of original components is carried out in productive site approved by the car manufacturers; in the same plants, Brembo also manufactures Aftermarket products that have the same high technological value as the original components.

Brembo, who have already been certifying their discs for more than 15 years with ABE approval, gladly acknowledged the introduction of the new European regulation that provides a unified standard, recognised by all countries.

Not only were the components on new vehicles approved straight away, but so was the entire range of Brembo discs and drums, which is made up of more than 2,200 items, for 97% coverage of the vehicles on the road in Europe.
 
Front Brakes Setup:
Brake Disc Type: High Carbon | Vented
Brake Disc Diameter: 350mm
Brake Disc Thickness: 34mm
Brake Disc Minimum Thickness: 32mm
Centering Diameter: 79mm
Height: 62mm

Rear Brakes Setup:
Brake Disc Type: High Carbon | Vented
Brake Disc Diameter: 325mm
Brake Disc Thickness: 25mm
Brake Disc Minimum Thickness: 23mm
Centering Diameter: 79mm
Height: 48.9mm

To Fit:
 
Range Rover Sport 3.0 SDV6 HSE
2019-

Must Read Before You Buy:

Please send us your VIN/Chassis/Registration number for your vehicle after purchasing via messages. 

This information is required so we can process the correct part for your vehicle.

Without the VIN/Chassis number, your order will be put on hold and will delay the delivery time!
Translation missing: en.general.search.loading