FOR VAUXHALL CORSA D VXR NURBURGRING FRONT DRILLED BRAKE DISCS BREMBO PADS 305mm
Front Axle Brakes Setup:
Brake Disc Type: High Carbon | Vented | Cross Drilled
Brake Disc Diameter: 305mm
Brake Disc Thickness: 28mm
Brake Disc Minimum Thickness: 26mm
Centering Diameter: 70mm
Height: 45mm
Front Axle Brakes Setup:
Brake Disc Type: High Carbon | Vented | Cross Drilled
Brake Disc Diameter: 305mm
Brake Disc Thickness: 28mm
Brake Disc Minimum Thickness: 26mm
Centering Diameter: 70mm
Height: 45mm
The first thing we will point out on the drilled rotor is the chamfer. Unlike our competition there is no edge on our chamfer. This is accomplished by the use of an outer radius curve rather than a countersink. With the radius curve, or Sinusoid Curve", it virtually eliminates an edge on the surface of the hole. With no edge, there is less stress build up, thus reducing the chance of surface checking. This smooth surface also makes the rotor more pad friendly by reducing the wear of the pad caused by the friction scraping against a sharp edge. The SP Diamond Slot is a unique design in slotted technology. This design was created to maximize the out-gassing while maintaining the structural integrity of the rotor. The series of slots and diamond slots “wipes” the surface of the pad, reducing gases which build up and cause brakes to fade at higher temperatures. The slots and diamonds are machined to the minimum rotor thickness to insure rotor strength and integrity. The appearance of this design is highly desirable to the performance enthusiast wanting a new look to their vehicle
To Fit:
VAUHALL CORSA Mk III (D) (S07) 1.6 VXR (L08) (204 BHP)
06/2011 - 08/2014
VAUXHALL CORSA Mk III (D) (S07) 1.6 VXR (L08) (209 BHP)
06/2011 - 08/2014
VAUXHALL CORSA Mk III (D) (S07) 1.6 VXR (L08) (211 BHP)
06/2011 - 03/2012
OPEL CORSA D (S07) 1.6 Turbo (L08, L68) (150 BHP)
05/2007 - 08/2014
for vehicles with sports package
OPEL CORSA D (S07) 1.6 Turbo (L08, L68) (192 BHP)
11/2006 - 08/2014
for vehicles with sports package
Must Read Before You Buy:
Please send us your VIN/Chassis/Registration number for your vehicle after purchasing via an eBay message.
This information is required so we can process the correct part for your vehicle.
Without the VIN/Chassis number, your order will be put on hold for 48 hours.